Image
Instructions for installing decking accessories (ref. PU26)
Before beginning to install Silvadec removable clips, please refer to the installation instructions, document ref. PU26.
View the pdf
Image
Instructions for installing removable clips (ref. PU32)
Before beginning to install Silvadec removable clips, please refer to the installation instructions, document ref. PU32.
View the pdf
#video
Image
Installing joists
The joists, of whatever type, must be installed using specific spacing, not exceeding the maximums detailed below:
Image
Fastening deck boards on removable clips
How to secure your deck boards using our removable clips
Image
Fastening boards on permanent clips
How to install and secure your deck boards
The upper surface of deck boards and exposed accessories has a brushed finish, to imitate the appearance of wood and increase grip. The non-brushed surface must not be uppermost.
Image
Removing a board installed with removable clips
Do you need to remove a board that has been fixed in with our removable clip?
The clip is designed so that the screw is accessible with a standard Torx T15 bit.
Slightly loosen the clip and shift it to position the screw head above the “lock hole”.
Image
Installing an edge board
Edge boards can be fixed with start and end clips.
These clips are screwed to the joist from the side or above (e.g. decking edge against a wall).
They secure the peripheral boards without exposed screws.
Image
Installing an aluminium corner profile
Looking to install an aluminium corner profile as a finishing
Image
Cutting an Atmosphere board
Tips? Cutting suggestions for the Atmosphere co-extruded range for decking
Image
Fascia board
Looking for the right final touches for your decking creation? Allow us to suggest the fascia board accessory.
Before fitting fascia boards, the fixed deck boards must be trimmed to an even finish using a straight-edge and a circular saw.