Image
Installing an edge board
Edge boards can be fixed with start and end clips.
These clips are screwed to the joist from the side or above (e.g. decking edge against a wall).
They secure the peripheral boards without exposed screws.
Image
Installing an aluminium corner profile
Looking to install an aluminium corner profile as a finishing
Image
Filling the Gabion structure
Before filling, it is important to check that the posts are properly fastened, vertical, and the correct centre-to-centre distance apart. Then check that the gabion panel is correctly inserted and held in place.
Filling should be performed via the top of the panel.
Image
Installing the panel containing plants
How to install your Botanical panel
Step 1: Positioning the posts
Ensure that the posts are installed precisely in accordance with the centre-to-centre distances.
Image
Installing and adjusting spacers
Do you need to adjust the level of your fencing boards?
You can insert an adjusting spacer under the base rail of the fencing panel to adjust the level of your fence boards.
Image
Installing a top rail on a Gabion panel
Do you wish to put a top rail on your Gabion panel?
The top rail must be installed with its kit of two connectors.
These two accessories are sold separately.
Image
Cutting an Atmosphere board
Tips? Cutting suggestions for the Atmosphere co-extruded range for decking
Image
Fascia board
Looking for the right final touches for your decking creation? Allow us to suggest the fascia board accessory.
Before fitting fascia boards, the fixed deck boards must be trimmed to an even finish using a straight-edge and a circular saw.