Looking to personalise your fence by including design panels?
It is possible to replace:
- 2 stacked fencing boards with one Mineral, Plant or Urban design panel.
- This design panel can be located in the fencing at any height and must be placed between 2 composite fencing boards.
- 3 stacked fencing boards with one Glass design panel (opaque or transparent).
- This design panel can be inserted into the fencing at any height, and must be located between two rails (halfway support profiles, top rail).
You are strongly advised to wear safety gloves when handling these components.
The Mineral, Plant and Urban motif design panels simply slot onto our fencing boards and are compatible with accessories in the sanded-finish aluminium range.
These design panels can be located at any height in your fencing, as long as they have a fence board on both sides.
A design panel can be used instead of a halfway support profile.
Take care not to stack more than three boards between each halfway support profile or design panel.
- Find out more; see PU11