We offer a full range of finishing and installation accessories , available in the same 3 colours as the boards for either uniform or contrasted cladding: Light Brown, Dark Brown and Dark Grey.
THE + POINTS
- The accessory colours match the Atmosphere cladding boards
- Substantial freedom of design
INSTALLATION ACCESSORIES
Give your cladding a flawless finish. Our accessories are strong, attractive and easy to work with.
They can be used to install cladding boards horizontally or vertically.
Instructions for installing Atmosphere open rhombus cladding
Made from two profiles assembled together, this produces an inward or outward facing corner. One is fixed on the cleats before the boards, and the other is clipped to the first to hide expansion gaps.
Made from two profiles assembled together, this produces an inward or outward facing corner. One is fixed on the cleats before the boards, and the other is clipped to the first to hide expansion gaps.
Colours: Light brown, Dark brown, Dark grey
Dimensions: 89x89x3600 mm
Packet of 140 clips
The clip provides a concealed fastening with a 15-mm space between boards (vertical projection 0 mm). It is installed on the cleat.
Start and end profile
Installed horizontally at the start and end of installation, it supports the composite profiles. Under no circumstances should it be installed vertically.
Installed horizontally at the start and end of installation, it supports the composite profiles. Under no circumstances should it be installed vertically.
Colours: Light brown, Dark brown, Dark grey
Dimensions: 34 x 52.5 x 3600 mm
Butting profile
Designed to be installed with the Silvadec open rhombus profile, this item conceals the buttings to align them vertically.
Designed to be installed with the Silvadec open rhombus profile, this item conceals the buttings to align them vertically.
Colours: Light brown, Dark brown, Dark grey
Dimensions: 34 x 62.5 x 3600 mm
It conceals butting gaps between profiles, for offset buttings.
It conceals butting gaps between profiles, for offset buttings.
Colours: Light brown, Dark brown, Dark grey
Dimensions: 32 x 88 x 35 mm
Corner profile
Finishing accessory placed in a vertical position; it conceals profile expansion gaps at the ends of the wall.
Finishing accessory placed in a vertical position; it conceals profile expansion gaps at the ends of the wall.
Colours: Light brown, Dark brown, Dark grey
Dimensions: 34 x 62.5 x 3600 mm
Installation jig
The jig simplifies nailed installation of composite cladding. It helps identify where the nail must go into the profile, and also aids alignment of the nails on the cladding.
The jig simplifies nailed installation of composite cladding. It helps identify where the nail must go into the profile, and also aids alignment of the nails on the cladding.
Dimensions: 50x166x50 mm