Image
Composite fence installation instructions (ref. PU11)
Before beginning to install one of our composite fences, please refer to the installation instructions, document ref. PU11
View the pdf
#video
Image
Aluminium fence installation instructions (ref. PU36)
Before beginning to install one of our Aluminium fences, please refer to the installation instructions, document ref. PU36
View the pdf
Image
Gabion fence installation instructions (ref. PU33)
Method for including a Gabion panel in your fence. Read ref. doc PU33
View the pdf
Image
Installing a base plate
If your site configuration means that the first fencing board has to be partially buried (posts embedded in concrete), you will need to insert a base plate instead of the first board.
Be sure to include the exposed height of the base plate when calculating the stacking height.
Image
Installing a base rail
Each composite fencing panel must include a base rail and a top rail. The base rail and top rail have an identical profile.
Image
Installing a halfway support profile
Regardless of the height and configuration of your installed composite fencing, it is essential that no more than 3 boards are stacked without including a halfway support profile.
Image
Installing a composite top rail
Every composite fence should be topped with a rail. A connector sold separately connects the rail to the post.
Insert the connectors on each side of the rail, in the runner provided. Each connector is fixed to the rail with the pressure screw provided (M6x12mm).
Image
Installing Glass design panels
How to place a Glass design panel into fencing
The glass design panel (opaque or transparent) replaces 3 stacked fencing boards.
This design panel can be inserted into the fencing at any height, and must be located between two rails (halfway support profiles, top rail).
Image
Installing design panels with mineral, plant or urban motif
Looking to personalise your fence by