Fence installation accessories

Our accessories are made of Qualicoat®-certified powder-coated Aluminium, with a sanded finish for improved resistance to impacts and scratches.

Image

Choose your fencing structure and components

We offer a wide range of accessories available in 3 colours: Anthracite Grey, Metal Grey and White.
They bring innovative design and enable installation on post supports up to 1.80 m in height.

3-in-1 high-wind post

Image

Positioned at the start, middle and end of the fence 

  • Positioned at the start, middle and end of the fence 
  • Can be cut to a maximum of 1845 mm for installation on a post support
  • The removable tab converts it into a corner post or enables installation of a fence post LED
  • Dimensions in mm: 70 x 64 x 1260 and 70 x 64 x 2315

 

Double-shell post support

Image

Dedicated post support for 3-in-1 high-wind post, for improved post hold

Dedicated post support for 3-in-1 high-wind post, for improved post hold

  • Dimensions in mm: 108 x 133 x 83
  • For a max. height of 1845 mm

Post cover

Image

Dimensions: 65 x 70 mm

Dimensions: 65 x 70 mm

Wall start semi-post

Image

This half-moon post is used for starting the fence against a wall, guaranteeing an elegant finish.

This half-moon post is used for starting the fence against a wall, guaranteeing an elegant finish.

  • Dimensions: 70 x 35 x 1845 mm

Wall start semi-post cover

Image

Dimensions: 70 x 35 mm

  • Dimensions: 70 x 35 mm

Top rail or base rail

Image

Each panel must have two rails mounted horizontally, one at the top and one at the bottom of the fencing.

Each panel must have two rails mounted horizontally, one at the top and one at the bottom of the fencing.

  • Dimensions: 26 x 30 x 1736 mm

Halfway support profile

Image

At least one halfway support profile must be inserted every three boards.

At least one halfway support profile must be inserted every three boards.

  • Dimensions in mm: 23.3 x 24 x 1,736

 

Base plate

Image

Attractive, lightweight and easy to install, it simplifies any installation on sloping ground and immediately creates a flat surface for installing the fencing.

Attractive, lightweight and easy to install, it simplifies any installation on sloping ground and immediately creates a flat surface for installing the fencing.

  • Dimensions: 21 x 153 x 1798 mm
  • Ultra-light compared to its concrete equivalent
  • Replaces a base rail and prevents the first board from coming into contact with the ground
  • Matches the posts

N.B. Compatible with the aluminium fencing board as long as a halfway support profile is inserted

Post finishing profile
Image
  • Dimensions: 27 x 9.5 x 1815 mm
  • To give the end of the fence an attractive finish
  • Dimensions: 27 x 9.5 x 1815 mm
  • To give the fence an attractive finish

Dividers

Image

Is only used for openworking aluminium fence boards (not compatible with the Silvadec composite boards)

Is only used for openworking aluminium fence boards (not compatible with the Silvadec composite boards)

  • Dimensions: 15 mm
  • Packet of 22 dividers (stackable)

 

Adjusting spacer

Image

Allows you to raise and lower the boards and to adjust their level on an uneven surface.

  • Dimensions: 30 x 45 x 15 mm
  • Made of zamac

Allows you to raise and lower the boards and to adjust their level on an uneven surface.

Top rail connectors and lighting profile

Image
  • The connectors ensure vertical positioning of the post and the centre-to-centre distances
  • Simplifies installation
  • Set screws are used to secure the top rail, and countersunk screws secure the lighting profile.
  • The connectors ensure vertical positioning of the post and the centre-to-centre distances
  • Simplifies installation
  • Set screws are used to secure the top rail, and countersunk screws secure the lighting profile.

schema connecteur