Installation instructions | decking & accessories
Instructions for installing
Instructions for installing decking accessories (ref. PU26)
Before beginning to install Silvadec removable clips, please refer to the installation instructions, document ref. PU26. View the pdf
Instructions for installing removable clips (ref. PU32)
Before beginning to install Silvadec removable clips, please refer to the installation instructions, document ref. PU32. View the pdf
The joists, of whatever type, must be installed using specific spacing, not exceeding the maximums detailed below:
Fastening deck boards on removable clips
How to secure your deck boards using our removable clips
Fastening boards on permanent clips
How to install and secure your deck boards The upper surface of deck boards and exposed accessories has a brushed finish, to imitate the appearance of wood and increase grip. The non-brushed surface must not be uppermost.
Removing a board installed with removable clips
Do you need to remove a board that has been fixed in with our removable clip? The clip is designed so that the screw is accessible with a standard Torx T15 bit. Slightly loosen the clip and shift it to position the screw head above the “lock hole”.
Installing an edge board
Edge boards can be fixed with start and end clips. These clips are screwed to the joist from the side or above (e.g. decking edge against a wall). They secure the peripheral boards without exposed screws.
Installing an aluminium corner profile
Looking to install an aluminium corner profile as a finishing
Inserting solar PV lights
How to install floor lighting on your decking