Image
Gabion fence installation instructions (ref. PU33)
Method for including a Gabion panel in your fence. Read ref. doc PU33
View the pdf
Image
Installing posts on post supports
You can opt to install your fencing on our double-shell post supports up to a post height of 1845 mm, which corresponds to a stack of 12 composite fence boards.
Image
Installing composite fence boards
How to install composite fencing boards
You simply insert and stack the composite boards between the posts, regularly slotting in halfway support profiles. Do not glue, weld or screw boards and halfway support profiles to each other or onto the posts.
Image
Posts embedded with concrete
Do you wish to embed your posts in concrete?
We advise having at least two people present to perform this operation.
Image
Installing a base plate
If your site configuration means that the first fencing board has to be partially buried (posts embedded in concrete), you will need to insert a base plate instead of the first board.
Be sure to include the exposed height of the base plate when calculating the stacking height.
Image
Installing a base rail
Each composite fencing panel must include a base rail and a top rail. The base rail and top rail have an identical profile.
Image
Installing a halfway support profile
Regardless of the height and configuration of your installed composite fencing, it is essential that no more than 3 boards are stacked without including a halfway support profile.
Image
Installing a composite top rail
Every composite fence should be topped with a rail. A connector sold separately connects the rail to the post.
Insert the connectors on each side of the rail, in the runner provided. Each connector is fixed to the rail with the pressure screw provided (M6x12mm).
Installing an aluminium top rail
When erecting your aluminium fence, you can install a top rail above the highest board for a clean finish.
An optional connector connects the rail to the post.